Water permit technical report

A technical account of how the proposed water use will work

We start by defining the subject and boundaries of the report, known in Poland as an operat wodnoprawny. We review the proposed water use, technical arrangements, location and receiving environment. Design information, balances and mapping are checked for consistency with the same project option. Missing parameters are identified before dependent sections are prepared.

The report describes the relevant equipment or activities, quantities characterising water use and graphical material suited to the agreed scope. We work with the designer and specialist contributors to clarify connections between the process, infrastructure and environmental setting. Information is organised so its origin and the basis of calculations and proposed operating parameters can be followed.

The report documents a defined proposal. Preparing it is not the same service as managing the entire water permit procedure or producing a construction design. If the process, location or balance changes during preparation, we identify the sections requiring revision so the documentation continues to describe the intended arrangements rather than an earlier design.

Technical data

Subject Water use, water services or structures covered by the agreed technical report.
Service type Technical documentation supporting a water-related permitting matter.
Assessment basis and requirements Purpose of the report, applicable documentation requirements, design information, balances and identified site and receiving-environment conditions.
Method
  1. Define the report subject and collect supporting information.
  2. Check consistency of technical parameters, balances and location data.
  3. Prepare the narrative, calculations and graphical material.
  4. Assemble the report and attachments within the agreed scope.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a water permit technical report with technical descriptions, relevant balances and supporting attachments. It connects the proposal's parameters with its location and intended water use. Sources and assumptions are documented, supporting preparation of the relevant application package and coordination of information between the investor and design team.

Connect with us

Contribute to the
future we are creating

Get in touch

Notification of an installation emitting to air

The right information for an installation notification

We begin by understanding the installation and reviewing the proposed documentation route. We establish which equipment and processes need to be described and what information the operator, developer or supplier should provide. For commissioning, project assumptions must be distinguished from confirmed data for installed equipment; for modifications, the extent of the documentation update also needs to be defined.

We organise the technology description, operating hours, materials used and information on emissions to air. Technical information and schedules are checked for consistency with each other and with intended use. Missing information needed for the notification is identified, and the documentation is structured so that equipment, processes and reported emission parameters can be clearly connected.

An installation notification is distinct from an emissions permit application. We do not assume that the notification route is appropriate simply from an equipment name. If the identified parameters indicate a need to reconsider the procedure, we explain this before finalising the material. The resulting documentation reflects the agreed installation scope and explicitly understood assumptions.

Technical data

Subject An air-emitting installation covered by the notification procedure
Service type Installation notification with technical and emissions data
Assessment basis and requirements Installation characteristics, equipment and process data, and the information scope applicable to the identified notification procedure.
Method
  1. Review the installation and the proposed documentation route.
  2. Collect equipment, material and planned operating-time information.
  3. Organise emissions data and clarify missing parameters.
  4. Prepare the notification and check consistency across its components.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive installation notification documentation with the agreed technical and emissions data. It describes the equipment, intended use and assumptions relevant to the emissions presented. The material is prepared for the defined installation and identified notification route, with clear links between source information and the parameters supplied for subsequent formal steps.

Connect with us

Contribute to the
future we are creating

Get in touch

Waste collection or treatment permit application support

A clear description of the waste management activity

We distinguish collection from treatment so that the documentation reflects the proposed activities. We examine site layout, storage arrangements, equipment and operational sequence. For a modification, the new scope is compared with existing documents. We establish waste types and quantities needed to describe capacity and the organisation of the different parts of the activity.

Waste flows are organised from acceptance through storage and any treatment to the onward transfer of resulting streams. Process descriptions, balances and storage parameters are checked for consistency. We identify appendices and additional information relevant to the application scope. Matters needing separate specialist input are highlighted for agreement rather than concealed within a general description of the operation.

The application covers the defined waste activity; it does not replace documentation of every other environmental impact at the site. Its content should allow the operator to compare intended working arrangements with the assumptions presented. We therefore make the scope and connections between streams, operations and parameters clear, including those needing revision if the solution changes.

Technical data

Subject Waste collection or treatment at a defined location
Service type Application documentation for a waste collection or treatment permit
Assessment basis and requirements Proposed activities, waste and installation data, site organisation and documentation requirements identified for the defined scope.
Method
  1. Distinguish the collection and treatment activities covered by the application.
  2. Organise waste streams, operations and storage parameters.
  3. Check flow consistency and identify supporting appendices.
  4. Prepare documentation describing the defined scope of the activity.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a waste collection or treatment permit application with the agreed documentation. The package describes activities, waste flows and the organisation of the installation or operational site. It connects quantitative data with the technical description, providing a clear basis for presenting the scope in the procedure and discussing the solution's further details.

Connect with us

Contribute to the
future we are creating

Get in touch

Water permit application support

Water permit documentation tied to the actual proposal

We define the application subject: proposed or existing water use, its scale and its connections with infrastructure and the surroundings. Existing decisions, design documents and operational information are reviewed. Confirmed data is separated from parameters still needing agreement so that the proposal describes the solution the client actually intends to build, use or continue operating.

We coordinate the material needed for the identified procedure, including the appropriate technical report and appendices. Location information, quantities and descriptions are checked for consistency between documents. During the proceedings, we help prepare technical explanations and agreed supplementary material, connecting questions with specific proposal parameters and the evidence on which the application is based.

The service covers the application and procedural support; preparation of the technical report itself is a distinct documentation task that can be included by agreement. We clarify which materials already exist and which need to be developed. This separates design work, document preparation and procedural explanations instead of presenting them as an undefined package.

Technical data

Subject Defined water use or water services
Service type Water permit application and support during the procedure
Assessment basis and requirements Proposal description, technical and location documents, and requirements appropriate to the defined application scope.
Method
  1. Define the application subject and water-use parameters.
  2. Review existing documents and identify information to be added.
  3. Coordinate technical material and prepare a consistent application.
  4. Support technical explanations concerning the documentation during proceedings.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a water permit application with the agreed supporting documents and assistance in explaining technical matters during the procedure. The package describes the proposal and connects its parameters with the documentation. It enables the developer or operator to trace the evidence behind the application and identify elements needing designer input or an additional study.

Connect with us

Contribute to the
future we are creating

Get in touch

Integrated permit application support

One installation, a consistent account of its impacts

We start by defining installation boundaries, describing the technology and establishing whether the work concerns a new permit or an amendment. For an amendment, we compare the installation covered by the existing decision with the proposed changes. Information on materials, resources, emissions and operating arrangements is organised around shared balances and parameters across the application.

We coordinate specialist assessments relevant to the installation and check their connections. Technical descriptions, schedules and supporting explanations are developed within the agreed documentation scope. Procedural support includes preparing appropriate technical clarifications and supplementary material. Consistency between process information, calculations and the proposed description of operating conditions is maintained as the application package develops.

The application should describe an installation in terms that relate to the operator's actual work. We therefore explain the parameters and assumptions underpinning the documentation and which changes could affect its validity. Scope depends on the installation and purpose of the procedure; preparing an application is distinct from the authority issuing or amending a permit.

Technical data

Subject An installation and the impacts addressed by its integrated permit application
Service type Application for an integrated permit or an amendment
Assessment basis and requirements Installation documents, the existing decision for amendments, and requirements and reference documents applicable to the activity assessed.
Method
  1. Define installation boundaries and the scope of the new or amended application.
  2. Agree common balances, parameters and operating scenarios.
  3. Coordinate specialist assessments and prepare application documentation.
  4. Provide agreed technical explanations during the procedure.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive an application for an integrated permit or an amendment, with the agreed assessments and supporting material. The documentation describes the installation using consistent data and explains the assumptions adopted. It supports the permitting procedure and helps the operator understand the links between technology, operating parameters and the environmental assessment presented in the application.

Connect with us

Contribute to the
future we are creating

Get in touch

Coordinated environmental permit applications

Separate procedures built on shared installation data

We first review the installation's activities, existing documents and the purpose of the package. We identify areas needing an individual application or notification and data shared by several documents. For a modernisation, it is important to distinguish unchanged parameters from those affecting existing documentation and the scope of the next procedural steps for the installation.

We organise preparation activities and specialist contributions. Common assumptions about capacity, operating hours and processes are carried into the relevant documents. Descriptions and schedules are checked so that submissions for different environmental topics do not present conflicting versions of the installation. Information and appendices specific to each separate procedure are identified alongside the shared material.

The package includes only the agreed applications and notifications identified for the scope reviewed. It does not merge separate procedures into one decision or replace an integrated permit. Clear separation of documents and their dependencies helps the client's team coordinate its own work and update information when parameters change before commissioning or during operation.

Technical data

Subject Installation permits and notifications outside one integrated permitting procedure
Service type Coordinated package of separate environmental applications
Assessment basis and requirements The installation's activities, existing decisions and documentation requirements identified separately for each environmental topic.
Method
  1. Identify applications and notifications relevant to the defined activity.
  2. Agree shared data and requirements specific to each procedure.
  3. Coordinate specialists and prepare the agreed package components.
  4. Check parameter consistency and dependencies between the documents.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive the agreed package of applications and notifications, organised by topic and procedure. Documents use shared installation data while identifying material specific to each matter. This helps the operator or developer coordinate information preparation and subsequent steps, with a clear understanding of what each document covers and which decisions or inputs it depends on.

Connect with us

Contribute to the
future we are creating

Get in touch

Air emissions permit application support

From process information to emissions documentation

We identify processes and emission sources within the application boundary and their relationships. We collect information on materials, fuels, equipment, exhaust arrangements and operating hours. For modifications, existing documentation is compared with the proposed solution. Supplier information and previous measurement results are reviewed for their relevance to the operating arrangements being assessed rather than transferred without context.

This evidence supports emission calculations and the analyses needed for the application. Assumptions and methods are selected with regard to the process and available information. We check consistency between emission quantities, release-point characteristics and operating scenarios, identifying material data gaps for clarification. Findings are presented in connection with the installation's technical description and its surroundings.

The documentation explains the assessment conditions and the basis of values presented in the application, enabling the operator to relate it to actual installation use. The service covers an application with calculations. Separate measurements or design of technical modifications are agreed according to the specific task rather than included by default within the documentation commission.

Technical data

Subject Sources of gaseous or particulate emissions from a defined installation
Service type Emissions documentation and air permit application
Assessment basis and requirements Process and emissions data, operating conditions, and requirements and calculation methods appropriate to the sources assessed.
Method
  1. Identify processes, release points and operating-time information.
  2. Review source-data suitability and define operating scenarios.
  3. Complete calculations and analyses within the agreed scope.
  4. Prepare the application and reconcile descriptions with the results.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive an application for a permit to emit gases or dust to air, with calculations and the agreed supporting documentation. The package records emission sources, evidence and assessment assumptions. It shows how process parameters relate to the results, providing the technical basis of the application for the installation scope and operating arrangements assessed.

Connect with us

Contribute to the
future we are creating

Get in touch

Support during administrative proceedings

Responses grounded in evidence and the authority's questions

We first read the request alongside the available documentation and previous correspondence. Questions needing a clearer description are separated from those revealing missing data, inconsistent assumptions or a need for further assessment. This establishes what can be answered using existing material and what requires input from the developer, operator or designer before a response can be completed.

Responses are structured so that each can be traced to the relevant question. Supplementary material may include technical descriptions, data schedules, corrected assumptions or outputs from agreed analyses. We check how new information affects other documents, because even a single parameter change may require revisions to several related tables, maps and conclusions in the submitted package.

The service focuses on substantive explanations and technical documentation. Where a question extends beyond technical assessment, we identify the need to coordinate with the person providing legal support. The client can see which elements of the response are complete and which depend on additional evidence, helping organise the subsequent steps in the proceedings.

Technical data

Subject Authority requests, supplementary documentation and technical explanations
Service type Technical support during administrative proceedings
Assessment basis and requirements The request, previously submitted documents, correspondence and current project or installation information.
Method
  1. Map the authority's questions to the relevant document sections.
  2. Identify data and assessments needed to answer each question.
  3. Prepare explanations and the agreed supporting material.
  4. Check updates for consistency with other documents in the proceedings.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive supplementary documentation, explanations and responses addressing the agreed scope of the request. The material identifies source evidence and links with documents already prepared. It helps the developer, operator or adviser handling the proceedings present a consistent position and recognise issues still requiring a design decision, source information or further technical analysis.

Connect with us

Contribute to the
future we are creating

Get in touch

Post-completion environmental assessment

Understanding actual impacts after commissioning

The assessment programme starts with the scope in the project's documents. We establish environmental components, locations and assessment conditions, together with information required from the operator. Measurements must be linked to the facility's operating state: results obtained at partial load or during unusual activity may not be comparable with the assumptions adopted for the development.

We coordinate the necessary measurements and collect records of how the installation operated during the work. Results are compared with the relevant decision conditions and earlier assessment. Differences are explained in light of design changes, actual operating parameters and limits to comparability. This avoids treating numbers obtained under different technical circumstances as if they represented the same scenario.

The report explains what the findings show about the operating development and whether further verification or impact reduction should be considered. Measurement-supported conclusions are separated from questions needing additional evidence. Clear reference to the conditions assessed helps the operator use the report appropriately, including when considering later changes to the way the facility is used.

Technical data

Subject Actual environmental impacts of a development after commissioning
Service type Post-completion assessment using measurements and operational information
Assessment basis and requirements Project decision conditions, earlier assessment documentation and measurement methods appropriate to the environmental components covered.
Method
  1. Define the assessment programme from relevant decision conditions.
  2. Link measurements to documented facility operating conditions.
  3. Compare results with earlier assumptions and applicable requirements.
  4. Interpret differences and identify any further actions needed.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a post-completion assessment report describing its scope, results and assessment conditions. It compares actual impacts with the relevant assumptions and decision conditions, explains significant differences and presents conclusions. The report provides an organised basis for subsequent documentation, further checks or consideration of measures to reduce the facility's environmental impacts.

Connect with us

Contribute to the
future we are creating

Get in touch

Environmental advisory support

A clear response to a specific environmental question

We start with the decision you need to make: whether a proposed change needs further assessment, what information is missing or how to respond to an identified risk. We establish the question and the operational context so that the advice relates to the actual process, facility or project stage rather than a generic description of the topic.

We examine the decisions, technical descriptions, test results or correspondence relevant to the question. We explain how the information connects and distinguish supported findings from matters requiring further evidence. Where several courses of action are available, we outline what each means for working arrangements, the documentation needed and the involvement of appropriate technical specialists.

The outcome may be an expert opinion, recommendations or a plan for further action. Its depth reflects the complexity of the issue and the available evidence. If documents alone cannot support a reliable answer, we identify the necessary measurements, checks or separate study rather than presenting an assumption as an established finding.

Technical data

Subject Specific obligations, project changes and operational risks
Service type Specialist consultation and expert opinion
Assessment basis and requirements Documents relating to the issue and environmental requirements considered against the facts supplied by the client.
Method
  1. Define the question and the decision the client needs to make.
  2. Review technical data, decisions and relevant correspondence.
  3. Compare possible actions and identify information gaps.
  4. Prepare a reasoned response and organise the next steps.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive an opinion, recommendations or a next-step plan addressing the agreed question. The document separates findings from assumptions, explains material limitations and identifies information needed for a subsequent decision. It can inform internal discussions, the scope of design work or a specialist commission addressing the issue that has been identified.

Connect with us

Contribute to the
future we are creating

Get in touch