Environmental usage fee calculations

Make every environmental fee calculation traceable

We agree the environmental uses included in the assignment and the calculation period. Information on activities, emissions and other quantities relevant to the obligations being considered is reviewed. Source records, supporting calculations and the basis for determining the fee are kept distinct, so the outcome is more than a total without an auditable calculation trail.

Units, period completeness and consistency with available environmental datasets are checked. Rates and calculation rules are selected for the appropriate period and scope once their applicability to the case has been confirmed. Discrepancies and missing information are referred for clarification, retaining a record of assumptions and the steps connecting operating information to each calculated amount.

The completed statements support internal verification and comparison between periods. The service does not automatically include making payments or submitting statements on the client's behalf. If a question requires separate interpretation of an obligation's scope, it is identified before calculations are closed rather than resolved without sufficient evidence about the activities and their circumstances.

Technical data

Subject Data and fees relating to agreed forms of environmental use.
Service type Environmental usage fee calculations and preparation of relevant statements.
Assessment basis and requirements Confirmed obligations, rules and rates for the calculation period, supported by documented operator data.
Method
  1. Establish the period and obligations included in the calculation scope.
  2. Collect operating data and check units and completeness.
  3. Select applicable calculation bases and produce documented fee calculations.
  4. Prepare statements and identify matters requiring the client's confirmation.
Delivery model KFB Enviro

What you receive

You receive fee statements and calculations for the agreed environmental uses. The material records input data, calculation bases and assumptions, allowing the result to be checked and differences from earlier periods explained. Outstanding confirmation points are identified. Payments and document submission are not undertaken without a separate agreement and the appropriate authorisation from the client.

Connect with us

Contribute to the
future we are creating

Get in touch

Spatial analysis of environmental constraints

See where environmental conditions influence the choice of solution

We first define the decision question and geographical scope. The task may concern alternative sites, an infrastructure route or the arrangement of project elements. Available environmental and project layers are selected after reviewing their sources, dates, accuracy and suitability. Evidence representing actual investigation is distinguished from indicative material that requires a more cautious interpretation.

Coordinate systems, geometry and attributes are organised before analyses are carried out against the agreed criteria. We examine overlaps, distances or other relevant spatial relationships. Alternatives are compared on a consistent basis, with the rules documented so a map explains both where a potential conflict occurs and why it has been identified in the assessment.

GIS findings guide further work but do not automatically replace field investigations or formal confirmation of constraints. An object missing from an available dataset is not evidence that it does not exist. The report identifies uncertainties relevant to the decision and locations where better information or specialist verification could change the assessment of an option.

Technical data

Subject Spatial relationships between a proposed project and environmental conditions.
Service type GIS-based location assessment, conflict identification and comparison of alternatives.
Assessment basis and requirements Agreed assessment criteria, option geometries and available spatial data with their currency and accuracy considered.
Method
  1. Define the decision question, geographical boundaries and alternatives.
  2. Review sources and organise spatial geometry and attributes.
  3. Analyse spatial relationships against the agreed criteria.
  4. Prepare maps, compare options and interpret relevant limitations.
Delivery model KFB Enviro

What you receive

You receive analytical maps and a spatial report showing identified constraints, conflicts and differences between options. The material documents assessment criteria, information sources and important limitations. It helps direct subsequent investigations towards the relevant locations and allows project teams to discuss alternatives using a shared and clearly explained spatial evidence base.

Connect with us

Contribute to the
future we are creating

Get in touch

GIS maps and databases for environmental documentation

Consistent spatial information from working layers to document attachments

We establish the package's purpose, such as a Polish project information sheet, an environmental impact report, a strategy or a monitoring programme. Required layers, presentation scales and descriptive attributes are defined. Existing files and object identifiers are reviewed so information from different disciplines can be combined without confusing locations, versions or the meaning of data fields.

Geometry, coordinate systems and database structure are organised consistently. We prepare clear symbols, legends and schedules aligned with the document's content. Names, monitoring point numbers and boundaries are checked across maps and tables. Handover formats reflect the agreed use, making the distinction between working datasets and finished graphical attachments clear to the receiving team.

The package records data origins and currency to support later corrections or additions. GIS preparation is not in itself a surveying exercise or confirmation of the legal status of property boundaries. New field investigations and additional environmental assessments require a separately defined scope where they are not part of the agreed input material.

Technical data

Subject Spatial layers, attribute databases and maps for specified environmental documentation.
Service type GIS data preparation and organisation of cartographic attachments.
Assessment basis and requirements Document structure, presentation and handover requirements, source records and agreed object identification conventions.
Method
  1. Define the required layers, maps and descriptive information.
  2. Organise coordinate systems, geometry and object identifiers.
  3. Prepare maps and schedules consistent with the document narrative.
  4. Check package completeness and deliver the agreed file formats.
Delivery model KFB Enviro

What you receive

You receive a package of maps and GIS data in agreed formats, with organised layers and source information. It is prepared for the specified documentation or subsequent design work. Consistent identifiers and descriptions help connect maps with tables, manage versions and make future updates without losing the relationship between spatial and descriptive records.

Connect with us

Contribute to the
future we are creating

Get in touch

Multi-parameter environmental monitoring

One programme for connected environmental observations

Component selection starts with the development, its stage and the questions that need monitoring. The programme may combine agreed noise, air, water or other relevant investigations without automatically including every possible parameter. Locations, frequencies and responsibilities are selected to reflect actual impacts and the conditions documented for the project or operating facility.

We coordinate specialists and providers, organising location identifiers, reference periods and data exchange. Component results are related to information on construction progress and operating conditions. Combined reports highlight significant events and response needs while preserving the separate methods, units and assessment criteria appropriate to each component and clearly distinguishing missing information from measured findings.

The programme establishes who reviews results, who receives notifications of deviations and when monitoring arrangements need revision. Specialist work is delivered by suitable providers under the agreed division of responsibilities. Combining datasets helps coordination but does not establish a shared cause for coincident changes; conclusions remain tied to the evidence available for the particular event.

Technical data

Subject An agreed combination of environmental components associated with a development or facility.
Service type Integrated monitoring programme, coordination and reporting.
Assessment basis and requirements Programme objectives, documented project conditions, activity schedules and component-specific methods and assessment criteria.
Method
  1. Select monitoring components, locations and investigation frequencies.
  2. Agree provider responsibilities and a shared information flow.
  3. Coordinate investigations and relate results to facility activities.
  4. Report findings and review the programme in light of observations.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a programme, an agreed data package and reports covering several environmental components. They connect findings with locations, periods and site events, identifying significant observations and follow-up actions. The material helps coordinate specialist teams and maintain consistent records without losing the detail needed to interpret each type of investigation.

Connect with us

Contribute to the
future we are creating

Get in touch

Periodic measurement planning and coordination

One programme for connected measurement obligations

We review installation documentation, relevant decisions and information about previous measurements. This establishes the obligations, parameters, locations and testing conditions to address. We identify information the operator needs to prepare, activities requiring installation access and whether commissioning or operating arrangements affect the ability to carry out a representative measurement campaign at the facility.

The programme becomes a schedule with tasks allocated between KFB Enviro and appropriate partners or subcontractors. Coordination aligns scopes, information exchange and collection of reports into a consistent package. We check how results relate to agreed parameters and operating conditions, helping the client avoid receiving disconnected documents with no clear relationship to the original measurement plan.

Delivery depends on site availability and suitable operating conditions; a scheduled date alone does not make a survey representative. Gaps, changes and additional work are identified if a campaign does not cover the agreed scope. Changes to an installation or its documentation may require programme updates, so completed tasks are distinguished from obligations needing further planning.

Technical data

Subject Periodic measurement obligations and testing scope for an installation or facility.
Service type Measurement programme planning and coordination of delivery teams.
Assessment basis and requirements Installation documentation, applicable measurement conditions, previous reports and method requirements for the individual parameters.
Method
  1. Review obligations and define testing parameters and locations.
  2. Agree schedules, operating conditions and contractor responsibilities.
  3. Coordinate measurements delivered by KFB Enviro and partners.
  4. Collect reports and check completeness against the programme.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a measurement programme, schedule and package of reports from completed testing. The material connects parameters, locations and conditions with the planned scope and identifies any remaining gaps. It supports future campaign organisation and consistent measurement records, while preserving the division of responsibilities between KFB Enviro and its partners.

Connect with us

Contribute to the
future we are creating

Get in touch

Environmental notifications before commissioning

Organise environmental tasks before the installation enters service

We review the installation being commissioned, its documentation and conditions arising from existing decisions. The start-up programme and division of project stages are examined. This provides a basis for identifying the environmental notifications relevant to the facility and the information that must come from the contractor, operator, designer or other participants before documents can be prepared.

Obligations are connected with deadlines applicable to the particular case and with the progress of physical works. We prepare the agreed documentation package, checking consistency of installation names, parameters and project boundaries. Incomplete information is distinguished from confirmed data so responsible team members can see which items require attention before documents are submitted or passed on.

The schedule follows the agreed commissioning plan and needs review when stages or technical arrangements change. An environmental notification package does not replace all project acceptance checks or other commissioning activities. Submission arrangements and any action on the client's behalf are agreed separately, with appropriate responsibilities and authorisation established before those actions are taken.

Technical data

Subject Environmental notifications and supporting material associated with installation commissioning.
Service type Obligation review and preparation of commissioning-related environmental documentation.
Assessment basis and requirements Installation scope, existing decisions, applicable requirements and the confirmed schedule of commissioning stages.
Method
  1. Review documentation and the scope of the installation entering service.
  2. Connect environmental tasks with project stages and relevant deadlines.
  3. Collect information from responsible teams and prepare the materials.
  4. Assemble the notification package and schedule of remaining obligations.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a notification package and a schedule of environmental obligations for the agreed commissioning scope. The schedule identifies required information and dependencies between tasks. It helps the project team coordinate documentation with operators and contractors and identify items requiring review if the date, sequence or scope of start-up changes.

Connect with us

Contribute to the
future we are creating

Get in touch

Integrated permit application support

One installation, a consistent account of its impacts

We start by defining installation boundaries, describing the technology and establishing whether the work concerns a new permit or an amendment. For an amendment, we compare the installation covered by the existing decision with the proposed changes. Information on materials, resources, emissions and operating arrangements is organised around shared balances and parameters across the application.

We coordinate specialist assessments relevant to the installation and check their connections. Technical descriptions, schedules and supporting explanations are developed within the agreed documentation scope. Procedural support includes preparing appropriate technical clarifications and supplementary material. Consistency between process information, calculations and the proposed description of operating conditions is maintained as the application package develops.

The application should describe an installation in terms that relate to the operator's actual work. We therefore explain the parameters and assumptions underpinning the documentation and which changes could affect its validity. Scope depends on the installation and purpose of the procedure; preparing an application is distinct from the authority issuing or amending a permit.

Technical data

Subject An installation and the impacts addressed by its integrated permit application
Service type Application for an integrated permit or an amendment
Assessment basis and requirements Installation documents, the existing decision for amendments, and requirements and reference documents applicable to the activity assessed.
Method
  1. Define installation boundaries and the scope of the new or amended application.
  2. Agree common balances, parameters and operating scenarios.
  3. Coordinate specialist assessments and prepare application documentation.
  4. Provide agreed technical explanations during the procedure.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive an application for an integrated permit or an amendment, with the agreed assessments and supporting material. The documentation describes the installation using consistent data and explains the assumptions adopted. It supports the permitting procedure and helps the operator understand the links between technology, operating parameters and the environmental assessment presented in the application.

Connect with us

Contribute to the
future we are creating

Get in touch

Coordinated environmental permit applications

Separate procedures built on shared installation data

We first review the installation's activities, existing documents and the purpose of the package. We identify areas needing an individual application or notification and data shared by several documents. For a modernisation, it is important to distinguish unchanged parameters from those affecting existing documentation and the scope of the next procedural steps for the installation.

We organise preparation activities and specialist contributions. Common assumptions about capacity, operating hours and processes are carried into the relevant documents. Descriptions and schedules are checked so that submissions for different environmental topics do not present conflicting versions of the installation. Information and appendices specific to each separate procedure are identified alongside the shared material.

The package includes only the agreed applications and notifications identified for the scope reviewed. It does not merge separate procedures into one decision or replace an integrated permit. Clear separation of documents and their dependencies helps the client's team coordinate its own work and update information when parameters change before commissioning or during operation.

Technical data

Subject Installation permits and notifications outside one integrated permitting procedure
Service type Coordinated package of separate environmental applications
Assessment basis and requirements The installation's activities, existing decisions and documentation requirements identified separately for each environmental topic.
Method
  1. Identify applications and notifications relevant to the defined activity.
  2. Agree shared data and requirements specific to each procedure.
  3. Coordinate specialists and prepare the agreed package components.
  4. Check parameter consistency and dependencies between the documents.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive the agreed package of applications and notifications, organised by topic and procedure. Documents use shared installation data while identifying material specific to each matter. This helps the operator or developer coordinate information preparation and subsequent steps, with a clear understanding of what each document covers and which decisions or inputs it depends on.

Connect with us

Contribute to the
future we are creating

Get in touch

Post-completion environmental assessment

Understanding actual impacts after commissioning

The assessment programme starts with the scope in the project's documents. We establish environmental components, locations and assessment conditions, together with information required from the operator. Measurements must be linked to the facility's operating state: results obtained at partial load or during unusual activity may not be comparable with the assumptions adopted for the development.

We coordinate the necessary measurements and collect records of how the installation operated during the work. Results are compared with the relevant decision conditions and earlier assessment. Differences are explained in light of design changes, actual operating parameters and limits to comparability. This avoids treating numbers obtained under different technical circumstances as if they represented the same scenario.

The report explains what the findings show about the operating development and whether further verification or impact reduction should be considered. Measurement-supported conclusions are separated from questions needing additional evidence. Clear reference to the conditions assessed helps the operator use the report appropriately, including when considering later changes to the way the facility is used.

Technical data

Subject Actual environmental impacts of a development after commissioning
Service type Post-completion assessment using measurements and operational information
Assessment basis and requirements Project decision conditions, earlier assessment documentation and measurement methods appropriate to the environmental components covered.
Method
  1. Define the assessment programme from relevant decision conditions.
  2. Link measurements to documented facility operating conditions.
  3. Compare results with earlier assumptions and applicable requirements.
  4. Interpret differences and identify any further actions needed.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive a post-completion assessment report describing its scope, results and assessment conditions. It compares actual impacts with the relevant assumptions and decision conditions, explains significant differences and presents conclusions. The report provides an organised basis for subsequent documentation, further checks or consideration of measures to reduce the facility's environmental impacts.

Connect with us

Contribute to the
future we are creating

Get in touch

Support during administrative proceedings

Responses grounded in evidence and the authority's questions

We first read the request alongside the available documentation and previous correspondence. Questions needing a clearer description are separated from those revealing missing data, inconsistent assumptions or a need for further assessment. This establishes what can be answered using existing material and what requires input from the developer, operator or designer before a response can be completed.

Responses are structured so that each can be traced to the relevant question. Supplementary material may include technical descriptions, data schedules, corrected assumptions or outputs from agreed analyses. We check how new information affects other documents, because even a single parameter change may require revisions to several related tables, maps and conclusions in the submitted package.

The service focuses on substantive explanations and technical documentation. Where a question extends beyond technical assessment, we identify the need to coordinate with the person providing legal support. The client can see which elements of the response are complete and which depend on additional evidence, helping organise the subsequent steps in the proceedings.

Technical data

Subject Authority requests, supplementary documentation and technical explanations
Service type Technical support during administrative proceedings
Assessment basis and requirements The request, previously submitted documents, correspondence and current project or installation information.
Method
  1. Map the authority's questions to the relevant document sections.
  2. Identify data and assessments needed to answer each question.
  3. Prepare explanations and the agreed supporting material.
  4. Check updates for consistency with other documents in the proceedings.
Delivery model KFB Enviro with a partner/subcontractor

What you receive

You receive supplementary documentation, explanations and responses addressing the agreed scope of the request. The material identifies source evidence and links with documents already prepared. It helps the developer, operator or adviser handling the proceedings present a consistent position and recognise issues still requiring a design decision, source information or further technical analysis.

Connect with us

Contribute to the
future we are creating

Get in touch